| Select product type | |
| Select product | |
| Select file type |
x|act i
Precision pressure transmitter with display
x|act i is a pressure transmitter that meets the most stringent requirements placed by contemporary industrial environments. Its core is a piezoresistive sensor that guarantees great signal stability. A special digital amplifier linearizes the signal and compensates for temperature effect. A variety of mechanical connections and seal materials available make this transmitter a great choice for food production and chemical industry. The housing of x|act i is ball-shaped, stainless steel or aluminum; the transmitter can have an LCD display.
HMP 331
Precision smart pressure transmitter
HMP 331 transmitter combines advanced microprocessor electronics and analog sensor technology.
Its digital amplifier is powered by a 16-bit analog-to-digital converter (ADC). ADC enables active compensation of transmitter's characteristics (nonlinearity, temperature error).
The converter generates 4 ... 20 mA output signal. In addition, the transmitter can be configured both locally and through the HART protocol.
Cast aluminum vibration- and impact-resistant housing contains transmitter and electronic amplifier. Its pressure port is made of stainless steel. Process connection is threaded (various options available). Electrical connection is a cable gland.
The design of the transmitter and its IP67 housing allow using it in severe conditions.
HMP 331-A-S
Precision smart gauge pressure transmitter with HART-protocol
HMP 331-A-S is a multifunctional smart precision gauge pressure transmitter that meets the most stringent requirements placed by contemporary industrial environments. Capacitive sensor makes the transmitter resistant to overpressure and guarantees stable operation in the long run. Special alloys used to make its diaphragm allow measuring pressure of highly aggressive media with this transmitter. Advanced hardware components make it easy to use and back outstanding metrological properties and additional capabilities. This transmitter offers excellent value for money.DMP 331
Pressure transmitter for low and medium pressures
DMP 331 is a universal general purpose pressure transmitter that proportionally converts medium pressure into electrical signal.It can measure absolute pressure and gauge pressure, both static and dynamic. Ranges from 0.04 to 40 bar. Special versions available. The housing is made of 1.4571 and 1.4435 grade stainless steel. Viton (FKM) is used to make the standard seal. Other seal materials are available on request.
DMP 330S
Multirange low-cost pressure transmitter
DMP 330S low cost pressure transmitter was designed specifically for applications requiring high precision and increased resistance to overpressure. The transmitter's steel diaphragm confidently resist not only static, but also dynamic overpressure (hydraulic shocks). Its sensor is welded to the housing, which allows resistance to some aggressive media, e.g., refrigerants.
DMP 330L
Low-cost pressure transmitter
DMP 330L is a low cost general purpose pressure transmitter that proportionally converts medium pressure into electrical signal of 4...20 mA or 0...10 V. The transmitter measures gauge pressure (upper range limit - 1 to 400 bar) and vacuum. The housing is made of stainless steel. Viton (FKM) is used to make the standard seal. The choice of process connections the transmitter can have is diverse. DMP 330L reliably measures pressure of liquids, gases and steam non-aggressive to stainless steel; its accuracy is 0.5% of span.DMP 330F
Multirange low-cost pressure transmitter
DMP 330F is a low cost pressure transmitter designed for public utilities and housing services, where compact and reliable transmitters are in great demand. The transmitter proportionally converts medium pressure into a current signal of 4 ... 20 mA; its accuracy is 0.5% of span. The housing is made of stainless steel.
DMP 330M
Multirange low-cost pressure transmitter
DMP 330M is a low cost pressure transmitter designed for public utilities and housing services, where reliable transmitters resistant to overpressure and hydraulic shock are in great demand. The transmitter proportionally converts medium pressure into a current signal of 4 ... 20 mA; its accuracy is 1% of span. The housing is made of stainless steel.
DMP 330H
Low-cost pressure transmitter
DMP 330H is an low cost pressure transmitter highly resistant to overpressure: its max permissible pressure is up to 500% of the nominal URL (upper range limit). The transmitter was designed to measure pressure of liquids, gases and steam non-aggressive to stainless steel. It proportionally converts medium pressure into a signal of 4 ... 20 mA or 0...10 V.DMP 333
Pressure transmitter for medium and high pressures
DMP 333 transmitter was designed for heavy duty applications in hydraulic equipment. The design of this transmitter fully meets the high requirements placed by manufacturers of hydraulic machines and equipment.
The features of DMP 333 include:
• high strength, i.e. resistance to dynamic shocks;
• outdoor housing.
The design of the transmitters complies with the requirements of IP 67 standard, which means it is well protected against moisture and direct sunlight. Strength of this transmitter combined with its measuring capabilities (long-term stability of calibration properties) give a reliable and robust pressure measuring device that can complete a wide range of industrial setups.
DMK 331
Pressure transmitter for aggressive media
DMK 331: industrial-grade aggressive media pressure transmitter with ceramic diaphragm. The transmitter can have various pressure ports: standard: G1/2" port and ceramic diaphragm; optional: flush diaphragm and a G1/2" port, designed for viscous media etc. Use PVDF port if media is aggressive to stainless steel (see picture). This material is used in medical and chemical industry environments and water treatment plants.
DMP 331P
DMP Sanitary pressure transmitter for food production / pharmaceuticals
DMP 331P is a pressure transmitter designed to enable technological processes monitoring through proportional conversion of registered pressure into electrical signal.The transmitter's diaphragm is flush, which makes it usable with viscous media. Its special design makes DMP 331P usable with media as hot as 300 °C.Port options include threaded connection, Clamp and Dairy pipe. The spans DMP 331P works with range from 100 mbar to 600 bar (from 10 kPa to 60 MPa). Non-standard spans are delivered on request.The transmitter is a good choice when you need to measure pressure of any medium non-aggressive to stainless steel (1.4435 and 1.4301). There is also a special version with tantalum coated diaphragm, which allows measuring pressure of extremely aggressive media (chlorine, etc.) Versatility of DMP 331P results from availability of standardized electrical output signals and a wide range of pressure ports.
DMK 331P
Sanitary pressure transmitter for food production / pharmaceuticals
DMK 331P: designed for viscous and aggressive media exerting high pressure. DMK 331P features a ceramic diaphragm that guarantees low temperature effect, good linearity and long-term stability. The transmitters can be filled with silicone oil (standard), edible oil, halocarbon. There is a cooled (radiator) version available for high temperature environments. A variety of output signals and electrical connections make DMK 331P a good choice for many industries. The transmitter can also be used in explosion hazard areas.DMP 331Pi
Precision sanitary pressure transmitter for food production / pharmaceuticals
DMP 331Pi is a pressure transmitter designed to enable technological processes monitoring through proportional conversion of registered pressure into electrical signal.
The transmitter's diaphragm is flush, which makes it usable with viscous media. Its special design makes DMP 331Pi usable with media as hot as 300 °C.
Port options include threaded connection, Clamp and Dairy pipe.
DMP 331Pi measures static and dynamic pressure with URL of 10 mbar to 40 bar (from 1 kPa to 4 MPa). Non-standard spans are delivered on request.
The transmitter is a good choice when you need to measure pressure of any medium non-aggressive to stainless steel (1.4435 and 1.4301). There is also a special version with tantalum coated diaphragm, which allows measuring pressure of extremely aggressive media (chlorine, etc.)
Versatility of DMP 331Pi results from availability of standardized electrical output signals and a wide range of pressure ports.
DMP 331i
Precision pressure transmitter with digital output
DMP 333i series smart pressure transmitters are the next generation, a development upon our standard industrial-grade pressure transmitters. These transmitters are general purpose; they are a great choice for any application requiring high accuracy and stable measurement properties. From the point of view of mechanics, the transmitters follow standard designs. Inside, they carry a new microprocessor-powered digital amplifier and a 16-bit analog-to-digital converter, which eliminates the necessity for an external analog amplifier. The data processing block actively compensates for sensor-related deviations (nonlinearities compensation, temperature effect compensation). DMP 331i offers you excellent technical features at an affordable price.
DMP 333i
Precision pressure transmitter with digital output
DMP 333i series smart pressure transmitters are the next generation, a development upon our standard industrial-grade pressure transmitters. These transmitters are general purpose; they are a great choice for any application requiring high accuracy and stable measurement properties. From the point of view of mechanics, the transmitters follow standard designs. Inside, they carry a new microprocessor-powered digital amplifier and a 16-bit analog-to-digital converter, which eliminates the necessity for an external analog amplifier. The data processing block actively compensates for sensor-related deviations, (nonlinearities compensation, temperature effect compensation).
DMP 343
Low pressure transmitter
DMP 343 generates a signal proportional to the pressure in the system. DSP 210 sensor is the core of this transmitter. Its small overall dimensions, threaded pressure port, standardized electrical connections and stainless steel housing make DMP 343 a perfect choice for adverse conditions of outdoors and mechanical environments. DMP 343 boasts excellent temperature stability and long-term stability of calibration.DMP 331K
Precision pressure transmitter with 0.5 ms response time
DMP 331K is a fast precision pressure transmitter: its response time is 0.5 milliseconds. This transmitter was designed for applications that require extremely fast and accurate pressure measurement. It carries a new electronic block that processes the signal. The choice of pressure ports and electrical connections this transmitter can have is as traditionally wide as it is for any other BD SENSORS pressure transmitter, which allows simple integration of DMP 331K into most systems and equipment.
DMP 334
High pressure transmitter
DMP 334 transmitter was designed for heavy duty applications in hydraulic equipment. The design of this transmitter fully meets the high requirements placed by manufacturers of hydraulic machines and equipment. Strength of this transmitter combined with its measuring capabilities (long-term stability of calibration properties) give a reliable and robust pressure measuring device that can complete a wide range of hydraulics setups. The stainless steel sensor here is welded to the pressure port.DMP 304
Extra high pressure transmitter
DMP 304 pressure transmitter was designed specifically for applications requiring high precision and increased reliability. This transmitter includes a compensated thin-wire sensor on a stainless steel diaphragm. Robust stainless steel housing allows using the pressure transmitter in extreme conditions and explosion hazard zones.
DMP 457
Pressure transmitter for shipbbuilding
DMP 457 was designed for heavy duty applications in offshore facilities and marine vessels. It can work with gaseous and liquid media non-aggressive to 1.4404 (316L) stainless steel.
The transmitter's sensor is piezoresistive, made of stainless steel; it shows precision and high long-term stability.
The transmitter was certified by Germany's Germanischer Lloyd (GL), Norway's Det Norske Veritas (DNV), China Classification Society (CCS).
DMK 458
Pressure transmitter for shipbbuilding
DMK 458: designed for sea. The transmitter can have various flush diaphragms that allow measuring thick, viscous and polluted media. Its capacitive ceramic diaphragm (proprietary design) can be made of 99.9% pure material; the diaphragm increases the accuracy of DMK 458 to the possible maximum while making the transmitter highly resistant to overpressure and capable of working in a wide range of temperatures.x|act i
Precision pressure transmitter with display
x|act i is a pressure transmitter that meets the most stringent requirements placed by contemporary industrial environments. Its core is a piezoresistive sensor that guarantees great signal stability. A special digital amplifier linearizes the signal and compensates for temperature effect. A variety of mechanical connections and seal materials available make this transmitter a great choice for food production and chemical industry. The housing of x|act i is ball-shaped, stainless steel or aluminum; the transmitter can have an LCD display.
DMD 331-A-S-LX/HX
Smart precision differential pressure/level transmitter with HART-protocol
DMD 331-A-S-LX/HX is a multifunctional smart precision differential pressure transmitter that meets the most stringent requirements placed by contemporary industrial environments. Capacitive sensor makes the transmitter resistant to overpressure and guarantees stable operation in the long run. The operating static pressure for the transmitter is up to 32 MPa. Special alloys used to make its sensors allow measuring pressure of highly aggressive media with this transmitter. Advanced hardware components make it easy to use and back outstanding metrological properties and additional capabilities. This transmitter offers excellent value for money.DMD 331
General purpose differential pressure transmitter
General purpose differential pressure transmitter. Resistant to unilateral overload equal to static pressure. Permissible media - liquids and gases non-aggressive to stainless steel (grades 1.4571 or 1.4435) and FKM. DMD 331 generates output signal proportional to the difference in pressure registered at its wetted parts.DMD 831
Differential pressure transmitter with display
DMD 831 differential pressure transmitter with digital display. Designed to measure pressure of gaseous and liquid media non-aggressive to 1.4435 (316L) grade stainless steel.DMD 341
Differential pressure transmitter
Low-cost differential pressure transmitter. DMD 341 is a transmitter designed to measure pressure of non-aggressive gases and air. Its silicon sensor guarantees great metrological properties and outstanding long-term stability.DPS 200
Pressure transmitter for non-aggressive gases
DPS 200 pressure transmitter measures gauge or differential pressure of non-corrosive gases. Its core is a very reliable piezoresistive sensor. The power source is a 24 V DC battery with protection against polarity reversal. This transmitter boasts stability, excellent linearity of signal conversion and compatibility with other devices. Compensation circuits minimize temperature drift for each sensor in the temperature range from 0 to 50 °C.DPS 300
Pressure transmitter for non-aggressive gases
DPS 300 pressure transmitter measures gauge and differential pressure of dry, non-corrosive gases. It accepts three readjusted spans and features a current/voltage output signal switch. The transmitter has a two-line LCD display. Info brought to the display describes values and contact status. The transmitter can have two PNP switches or two dry contact switches.DPS+
Pressure transmitter with relay output
DPS+ pressure transmitter measures gauge or differential pressure of non-corrosive gases. Its core is a very reliable piezoresistive sensor. Special circuits built into the device minimize temperature effect. In addition to standard output signals, the device can have up to 2 switch outputs. The power source is a 24 V DC battery with protection against polarity reversal. The transmitter can also be powered by a 230 V AC source. Depending on the version, the device consumes 24 V DC or 230 V, 110 V, 24 V AC power. This transmitter boasts stability, excellent linearity of signal conversion and compatibility with other devices. Compensation circuits minimize temperature drift for each sensor in the temperature range from 0 to 60 °C.DS 200M
(BAROLI) Digital pressure gauge with indicator
Primary purpose of DS 200M precision digital pressure gauge is to complete pneumatic and hydraulic systems. Its display rotates along the gauge axis and that of its own, which allows always having the readings in sight. Three buttons under the display enable control over the transmitter's functions. In addition to selecting one of the 9 units of measurement - bar, mbar, f/dm2, mWCr, dm Hg, cm Hg, mm Hg, kPa, MPa, - you can select the position of the decimal point. Apart from the current pressure, the transmitter displays its minimum and maximum values, which makes it a peak detector as well.
DM 10
Digital pressure gauge
DM10: small-scale inexpensive digital pressure gauge.Powered by batteries. This device is good for mobile monitoring. A 4.5-digit LCD display shows battery charge and pressure changes; it is easy to read. The gauge also allows switching between the most common UoM (bar, psi, Pa, MPa). Options: automatic zero set, capturing, min and max shutdown values.
DMK 456
Pressure transmitter for marine operating conditions
DMK 456: designed to measure pressure in systems or level in tanks. DMK 456 pressure transmitter has been certified by Germanischer Lloyd; this model is used in construction of sea vessels and maritime platforms. Heavy-duty housing of corrosion-resistant steel or special alloys allows measuring pressure of corrosive gases and liquids under extremely severe operating conditions. DMK 456 features a capacitive ceramic diaphragm developed by BD SENSORS specialists, which is resistant to overpressure and various aggressive media.HU 300
Hammer Union Pressure Transmitter
This pressure transmitter features a Hammer Union port; it was designed with severe operation conditions in mind, those that require increased accuracy and robustness. Its strain-gauge sensor is of a low drift variety, which guarantees great metrological properties and outstanding long-term stability. Monolithic pressure port prevents mounting-related characteristics changes. HU 300 transmitter is resistant to vibration, shocks and pressure peaks; its metrological properties remain stable. For abrasive and corrosive media it can bear an Inconel alloy pressure port. The standard version is 2-wire with a 4 ... 20 mA output; custom versions can be intrinsically safe and output other types of signals.LMP 307
Stainless Steel Liquid Level Transmitter
LMP 307 is a submersible probe designed to continuously measure level of liquids.LMP 307i
Precision Submersible Level Transmitter
LMP 307i is a precision, highly stable submersible probe designed to continuously measure level of liquids non-aggressive to stainless steel. The signal processing block (digital) actively compensates for temperature effect, which allows applying this device to media with varying temperature.
LMP 808
Submersible Liquid Level Transmitter (PVC Housing)
LMP 808 is a submersible probe designed to continuously measure level of liquids non-aggressive to stainless steel and PVC (housing material). The transmitter's diaphragm is flush, which makes it usable with viscous media. The probe-cable connector allows simple replacement of the device if necessary.
LMK 358
Ceramic Sensor Submersible Level Transmitter
LMK 356 is a submersible probe designed to continuously measure level of liquids. The probe's core is a strong ceramic diaphragm that allows long-term measurements of the smallest level values. Its washed diaphragm is not susceptible to clogging and sticking, which makes the probe a perfect choice for high viscosity media, such as liquid cement paste. The probe-cable connector allows simple replacement of the device if necessary. Flexible stainless steel tube is an optional cable sheath.
LMK 358H
Precision Submersible Level Transmitter with HART protocol
LMK 358H submersible probe is an improved version of LMK 358: its accuracy is increased to 0.2 and it is HART-enabled. Electronic microprocessor effectively compensates for deviations in performance of the sensor (nonlinearities compensation, temperature effect compensation). Analog output signal is modulated by HART signal. Thus, the probe allows adjusting parameters (offset, measurement range, pressure snubbing) and sends data to any HART-enabled control system. With a slight extension of the housing, you can customize LMK 358 to meet your requirements and operating conditions while retaining all other design parameters.
LMK 858
Aggressive Media Submersible Level Transmitter
LMK 858 is a submersible probe designed to continuously measure level of aggressive liquids, such as acids and alkalies. Resistance to aggressive media comes from ceramic diaphragm and special plastics. Flush diaphragm allows measuring pressure of viscous substances, such as sludge deposits etc. Various elastomers are used to make the probe's seals. Its standard housing is PVC; optional housing material - PVDF. The probe-cable connector allows simple replacement of the device if necessary. There is a number of mounting options available, which simplifies its installation into any setup.
LMP 308
Stainless Steel Level Transmitter
LMP 308 is a submersible probe designed to continuously measure level of liquids non-aggressive to stainless steel. The device allows measuring pressure of viscous substances, such as sludge deposits etc (remove the back cover for that purpose). Its diaphragm is washed with a liquid medium, which prevents clogging. The probe has a cable plug, which makes replacing it simple. LMP 308i is the smart version of the probe; its accuracy is 0.1% of span. LMP 308 offers you excellent technical features at an affordable price. Our engineers can always tailor the LMP 808 transmitter to your specific requirements and operating conditions.
LMP 308i
Stainless Steel Smart Submersible Level Transmitter
LMP 308i is a smart submersible probe that, compared to LMP 308, offers improved measurement accuracy: 0.1% of span. Inside, it carries a new 16-bit analog-to-digital converter. The device actively compensates for deviations in performance of the sensor (nonlinearities compensation, temperature effect compensation). At the same time, it is robust and capable of operating in adverse conditions.
LMP 305
Stainless Steel Liquid Level Transmitter
LMP 305 is a submersible probe designed to continuously measure level of liquids non-aggressive to stainless steel. Its small diameter (19 mm) allows using LMP 305 probe in confined spaces.LMK 458
Marine Submersible Level Transmitter
LMK 458 submersible level transmitter registers level of liquid in service tanks by measuring hydrostatic pressure. The transmitter was certified by Germanischer Lloyd; this model is used in construction of sea vessels and maritime platforms. Permissible temperature limits up to 125 °C and intrinsically safe design allow using LMK 458 in extreme operating conditions and a variety of liquids, including aggressive ones. The core of LMK 458 is a capacitive ceramic diaphragm developed by BD Sensors; it is highly resistant to overpressure and can handle various aggressive media.
LMK 306
Submersible ultra-small probe with ceramic diaphragm
LMK 306 is a submersible ultra-small (Ø17 mm) probe with ceramic diaphragm designed to continuously measure level of liquids non-aggressive to stainless steel.
LMK 307
Submersible probe with ceramic diaphragm
LMP 307 is a submersible probe designed to continuously measure level of liquids non-aggressive to stainless steel.
LMK 331
Gauge Pressure Level Transmitter for Process Lines and Vessels
LMK 331 transmitter was specially designed to control technological processes. Its ceramic diaphragm is resistant to aggressive media. The pressure port is made of 1.4571 stainless steel or PVDF or PVC for aggressive media. The transmitter's diaphragm is flush, which makes it usable with viscous media. Pressure port seal is made of FKM. Other elastomers can be used on customer's request.
LMP 331i
Precision Hydrostatic Pressure Transmitter with Digital Output
LMP 331i series smart pressure transmitters are the next generation, a development upon our standard industrial-grade pressure transmitters. These transmitters are general purpose; they are a great choice for any application requiring high accuracy and stable measurement properties. From the point of view of mechanics, the transmitters follow standard designs. Inside, they carry a new microprocessor-powered digital amplifier and a 16-bit analog-to-digital converter, which eliminates the necessity for an external analog amplifier. The data processing block actively compensates for sensor-related deviations (nonlinearities compensation, temperature effect compensation).
LMP 331
Screw-in Stainless Steel Pressure Transmitter
LMP series screw-in pressure transmitters are designed to continuously measure level of liquids in open vessels. They are a perfect choice when you need to measure low and medium intensity pressure of viscous substances and keep the sensor free from blockage of any sort. The transmitters have a flush diaphragm, which cannot get clogged. The process connection is a G 3/4" threaded pressure port. Seal behind the thread makes the connection airtight (watertight). Our engineers can always tailor the LMP 331 series transmitters to your specific requirements and operating conditions.
LMK 351
Gauge Pressure Level Transmitter for Process Lines and Vessels
LMK 351 transmitter was designed to control technological processes. Its ceramic diaphragm is resistant to aggressive media. The pressure port is made of stainless steel or PVDF or PVC for aggressive media. The transmitter's ceramic diaphragm is flush, which makes it usable with viscous media. Sensor to port seal is made of FKM. Seals can also be made of other elastomers.
MH-02 (COM), HI 321 (USB)
HART modems
HART modems and the accompanying software allow configuring smart HART-enabled pressure transmitters HMR 331, DMD 331-A-S, LMK 358H, X | act i.ADAPT-100
Configurators
ADAPT-100 configurator allows switching spans of multirange pressure transmitters and adjustment of zero of the analog unified current signal 4 ... 20 mA.ADAPT-100 has a polycarbonate housing; its enclosure protection rating is IP40. The configurator's cable ends in a DIN 43650 connector that fits 4 ... 20 mA transmitters; there are five control buttons to the device: ON/OFF, ZERO TRIM zero adjustment button and three span selection buttons. There are also six indicators on the configurator's control panel: POWER, LINK, ERROR and three span indicators.The configurator has two modes of operation: configuration mode and calibration mode.
ADAPT-1, ADAPT-3
ADAPT-1 (COM) configurator and its software allow configuring DMP 331i / 333i, LMP 331i / 308i transmitters. ADAPT-3 (COM) configurator and its software allow configuring DS 4/DS 6 pressure switches.SVOP, SVON
Clamps for Submersible Transmitters
SVOP - zinc-plated clip, SVON - stainless steel clamp. Diameter of clamped cables - from 6 to 15 mm
U-shaped, circular
Pulse tubes:
Pulse tubes decrease medium temperature. Operating pressure - up to 25 MPa. Operating temperature - up to 300°С. Material - carbon steel or stainless steel. Pressure port M20x1.5.KL3
Termination boxes
Commutated circuits from hydrostatic level transmitter (4...20 mA current output signal, built-in thermometer) and surge/lightning protection.
KL4
Termination boxes
Commutated circuits from hydrostatic level transmitter (4...20 mA current output signal, built-in thermometer) and surge/lightning protection.
AGP-24-1
Power supply units
Stabilized power supply units deliver electricity to low-power devices as part of industrial-grade control setups.DS 200
Multi-function Pressure Transmitter/Switch with Indicator
DS 200 multifunction pressure transmitter is a combination of several devices: pressure transmitter with discrete output and digital display. Primary purpose of DS 200 is to complete pneumatic and hydraulic systems. It is also a good choice when you need to measure pressure of any medium non-aggressive to stainless steel. The design of its indicator allows swiveling the display so the installation position does not matter, you can always have the readings before your eyes. 4-digit LED display shows the pressure value. Buttons located on the front panel of the display allows configuring device (parameters of switch outputs operation - thresholds, operation modes, delay, etc.)
DS 201
Multi-function Pressure Transmitter/Switch with Indicator
DS 201 multifunction pressure transmitter is a combination of several devices: pressure transmitter, programmable pressure switch with discrete output and digital display. Works with viscous, pasty aggressive and contaminated media. The transmitter can also be a peak detector. The design of its indicator allows swiveling the display so the installation position does not matter, you can always have the readings before your eyes.
DS 200P
Multifunction pressure transmitter
DS 200P multifunction pressure transmitter is a combination of several devices: pressure transmitter with discrete output and digital display. The transmitter works with any process media non-aggressive to stainless steel. The design of its indicator allows swiveling the display so the installation position does not matter, you can always have the readings before your eyes. 4-digit LED display shows the pressure value. Buttons located on the front panel of the display allows configuring device(parameters of switch outputs operation - thresholds, operation modes, delay, etc.)
DS 4
Pressure Switch
DS 4 is a pressure switch designed to be a part of pneumatic setups. It can measure gauge pressure and vacuum. The components of this device - aluminum pressure port, silicon sensor, - allow working with compressed air and non-aggressive gases. Its housing is made of PA 6.6 plastic. Adjustable switch output offers a wide range of applications. LEDs reflect switch output status.
DS 6
Programmable Pressure Switch for Hydraulic Systems
DS6 programmable pressure switch can be used in a wide range of setups. Its wetted parts are made of stainless steel (pressure port), ceramic Al 2 O 3 (sensor), FKM or NBR (seal). The materials were selected with the aim to make the device universal and capable of working with most media found in various industries. Integrated programmable microprocessor enables standard functions and a number of options allowing selecting the optimum mode for any operating conditions. The switch can have 1 or 2 outputs depending on the modification. Registration of threshold values triggers yellow and green LEDs located on the housing. Setting threshold values and selecting switching modes requires an adapter and software (supplied separately) P-set.
ADAPT-1, ADAPT-3
ADAPT-1 (COM) configurator and its software allow configuring DMP 331i / 333i, LMP 331i / 308i transmitters. ADAPT-3 (COM) configurator and its software allow configuring DS 4/DS 6 pressure switches.
PA 430
PA 430 indicator works with any device outputting at 4..20 mA through a 2-wire connection, connectors - DIN 43650, Binder. The display is mounted directly on the transmitters and does not require additional power. It is set up with buttons on the front panel. The indicator's housing and display rotate along their axes. After mounting, you can adjust the display's position so the readings are easy to see. The LED display functions fine in subzero temperatures. You can order PA 430 with 1 or 2 PNP outputs and/or in Exia version. Coupled with pressure transmitters, DMD 331 can operate as a differential pressure switch.
NDI 10
NDI 10 is a digital indicator designed to visualize analog signal and convert it to a digital one. NDI 10 has two or four switch outputs and a buzzer. On request, we can add active current output to a version with two switch outputs. RS-485 interface allows sending data to any monitoring system supporting Modbus RTU protocol.
NDI 20
NDI 20 is a digital indicator designed to visualize analog signal and convert it to a digital one. The device has two or four switch outputs (OC type). On request, we can add active current output to a version with two switch outputs. The 4-digit display and 20-point histogram show the values simultaneously. NDI 20 features an RS-485 / Modbus RTU digital interface and a buzzer.
NDI 30
NDI 30 is a digital indicator designed to visualize analog signal and convert it to a digital one (RS-485 interface). There are two switch outputs to the device and a switch status indicator. Compared to NDI 10, this model features an additional display to visualize switch and thresholds statuses.
NDI 40
NDI 40 displays current values and process parameters and trends graphically. The indicator can have 2, 4 and 8 input channels (0-20 mA...4-20 mA). Each channel can be configured and described; each has its alphanumeric description (text). NDI 40 features galvanically isolated RS-485 digital output and communicates via ModBus RTU. Thus, a number of digital indicators can form a network, collecting data from each block remotely and enabling remote configuration. The indicator also has an extra output to power transducers and transmitters (rear terminals, 24 V DC±5%/max 200 mA). Backlit display (128 x 64 px) shows process graphs for each channel separately. Different modes of operation allow finetuning visualization depending on your requirements. The 6 buttons on the front panel enable the device setup. The help menu with detailed description makes the process fairly simple.
PA 440
PA 440 is an outdoor indicator designed to visualize the analog signal of the current loop. It does not require external power. To control level and pressure through threshold, you can add one or two low-current switches to PA 440. The device may be made intrinsically safe or Ex version. There two buttons that enable setting it up through a menu. Optional, supplied on request: cast aluminum housing, LED display.
VS 100, VS 200, VS 300, VS 500
Valve units
One- and two-valve blocks (VS100, VS200) enable connection of differential and absolute pressure transmitters to process control lines. Three- and five-valve blocks (VS 300, VS 500) enable connection of differential pressure transmitters to process control lines.TTR1 ... TTR9
Pressure snubbers
TTR series pressure snubbers protect gauge and absolute pressure transmitters against short-term pressure surges that greatly exceed the designed upper range limit. The snubbers can have any of the variety of mechanical connections both for transmitters and process lines: G½ ", G1A", M20x1.5.MH-02 (COM), HI 321 (USB)
HART modems
HART modems and the accompanying software allow configuring smart HART-enabled pressure transmitters HMR 331, DMD 331-A-S, LMK 358H, X | act i.ADAPT-100
Configurators
ADAPT-100 configurator allows switching spans of multirange pressure transmitters and adjustment of zero of the analog unified current signal 4 ... 20 mA.ADAPT-100 has a polycarbonate housing; its enclosure protection rating is IP40. The configurator's cable ends in a DIN 43650 connector that fits 4 ... 20 mA transmitters; there are five control buttons to the device: ON/OFF, ZERO TRIM zero adjustment button and three span selection buttons. There are also six indicators on the configurator's control panel: POWER, LINK, ERROR and three span indicators.The configurator has two modes of operation: configuration mode and calibration mode.
ADAPT-1, ADAPT-3
ADAPT-1 (COM) configurator and its software allow configuring DMP 331i / 333i, LMP 331i / 308i transmitters. ADAPT-3 (COM) configurator and its software allow configuring DS 4/DS 6 pressure switches.U-shaped, circular
Pulse tubes
Pulse tubes decrease medium temperature. Operating pressure - up to 25 MPa. Operating temperature - up to 300°С. Material - carbon steel or stainless steel. Pressure port M20x1.5.
